Alert Notification - Sanyo M1 User Manual

Adjusting the Phone's Receiver Volume
To adjust the receiver volume:
1.
Select
2.
Select either Earpiece or Speaker.
3.
Using the navigation key, choose a volume level, and
select Done (left softkey).
Adjusting the Application, Start-up/Power-off, or
Key Beep Volume
To adjust the Application, Start-up/Power-off, or Key Beep
volume:
1.
Select
2.
Select Application, Start-up/Pw-off, or Key Beep.
3.
Using the navigation key, choose a volume level, and
select Done (left softkey).

Alert Notification

Your phone can alert you with an audible tone when you
change service areas, once a minute during a voice call, or
when there are incoming or missed Sprint PCS Ready Link calls.
To enable or disable alert sounds:
1.
Select
2.
Select Service, Ready Link, Voicemail, Messaging,
Minute Beep, or Signal Fade and press
3.
Use your navigation key to select a setting and press
52 Section 2B: Controlling Your Phone's Settings
> Settings > Sounds > Volume > Receiver.
> Settings >Sounds > Volume.
> Settings > Sounds > Alerts.
.
.