Using Call Guard - Sanyo M1 User Manual

Using Call Guard

Your phone has two ways of alerting you when you are
roaming off the Nationwide Sprint PCS Network: the onscreen
roaming icon and Call Guard. Call Guard makes it easy to
manage your roaming charges by requiring an extra step
before you can place or answer a roaming call. (This additional
step is not required when you make or receive calls while on
the Nationwide Sprint PCS Network.)
To turn Call Guard on or off:
1.
Select
2.
Highlight On or Off and press
To place roaming calls with Call Guard on:
1.
From standby mode, dial 1 + area code + the seven-digit
number and press
2.
Press
displayed.
– or –
Press any key to erase the pop-up message, and then
select Options (right softkey) > Roam Call.
To answer incoming roaming calls with Call Guard on:
1.
Press
that roaming charges will apply.)
2.
Press
displayed.
– or –
Press any key to erase the pop-up message, and then
select Options (right softkey) > Answer.
Note:
If the Call Guard feature is set to On , you need to take extra
steps to make and receive roaming calls.
96 Section 2D: Controlling Your Roaming Experience
> Settings > Others > Roaming > Call Guard.
.
to proceed while the pop-up message is
. (A message will be displayed notifying you
to proceed while the pop-up message is
.