Imperx CXP-C5180M User Manual page 86

Cheetah Python Cameras User Manual | CoaXPress (CXP) Interface
4. Browse for either the edited .dpm file or .hpm file, select it, and click the Upload button.
Wait for the upload to finish.
5. After the upload is completed, do a power cycle on the camera.
6. After the camera re-starts, start your software GUI and select Data Correction.
7. Ensure that DPC and HPC are set to Static so that the camera uses the maps you loaded.
8. Retake images as described in sections
hot pixels to ensure all defective and hot pixels are now corrected.
August 27, 2019
Figure 56: Supported upload files
7.2.1 Finding defective pixels and
Page
86 of 86
7.2.2 Finding
Rev 1.0