Imperx CXP-C5180M User Manual page 37

Cheetah python cmos cameras with coaxpress (cxp) interface
Table of Contents

Advertisement

Cheetah Python Cameras User Manual | CoaXPress (CXP) Interface
Table 14: Acquisition Control parameters (continued)
Parameter Name
Type
TriggerDebounce
Enumeration
TriggerDelay
Integer
1
ExposureMode values:
Off – Disables the Exposure and let the shutter open.
TriggerWidth – Uses the width of the current Frame or Line trigger signal(s)
pulse to control the exposure duration. Note that if the Frame or Line
TriggerActivation is RisingEdge or LevelHigh, the exposure duration will be the
time the trigger stays High. If TriggerActivation is FallingEdge or LevelLow, the
exposure time will last as long as the trigger stays Low.
Timed – Timed exposure. The exposure duration time is set using the
ExposureTime or ExposureAuto features and the exposure starts with the
FrameStart or LineStart.
2
ExposureTime - The maximum exposure time is equal to the frame period. For longer
exposure times, increase the frame period using the Acquisition Frame Time
feature or the Acquisition Frame Rate feature.
3
TriggerSourse values:
Line 1 – Specifies that the Hardware Input Line GP IN 1 (TRIGGER 1) will be used
as external source for the trigger signal.
Line 2 – Specifies that the Hardware Input Line GP IN 2 (TRIGGER 2) will be used
as external source for the trigger signal.
CxpTrigger – Specifies that the trigger source will be generated by CXP
framegrabber.
PulseGenerator – Specifies that the trigger source will be generated by camera's
internal Pulse Generator.
Software – Specifies that the trigger source will be generated by software using
the TriggerSoftware command.
August 27, 2019
Value
String
"Disabled"
"TenMicroSeconds"
"FiftyMicroSeconds"
"OneHundredMicroSeconds" 3
"FiveHundredMicroSeconds" 4
"OneMilliSecond"
"FiveMilliSeconds"
"TenMilliSeconds"
Min: 0
Max: 1000000
Page
37 of 86
Access Description
RW
Specifies
Num.
debounce period
0
of the trigger
signal.
1
Subsequent trigger
2
signals coming to
the camera within
the de-bounce
time period are
ignored
5
6
7
RW
Specifies delay
time in
microseconds
between the
trigger pulse and
start of exposure.
Rev 1.0

Advertisement

Table of Contents
loading

Table of Contents