Table of Contents
Advertisement
5
II. ASSEMBLY
CD
Leveling Foot Screw
• For stable installation of the
microscope, manipulate the
adjustment screw at the
rear-right of the base
(Fig.2-1).
Fig.2-1
(2) Lamp and Lamp Housing
I
CAUTIONS
I
• Use the specified lamp "Nikon Halogen 6V 30W".
e Use the specified Halogen Lamp. See Electrical Specifications
on p.4 1 tor details .
• Keep the lamp cover on or use gloves when mounting the lamp
bulb, so as not to touch the surface directly with your fingers.
If the bulb surface IS contaminated with finger marks or dirt,
wipe them off with lens tissue. Be sure to remove the lamp
cover after mounting the lamp.
• Remove the lamp housing cover pressing the cover detaching
buttons (Fig. 2-2).
elnsert the lamp Into the socket pin holes until it reaches the limit
(Fig. 2-3).
• Reattach the cover.
Cautions when dismounting
• Turn oft the power switch. (Assure that It is off.) Do not touch the
lamp-bulb Immediately after turning It off because It is very hot.
Wait until it cools enough for replacing.
• Power supply cord should be kept away trom lamp housing while the
lamp hOUSing is hot.
Fig.2-2
Fig.2-3
Advertisement
Table of Contents
