Software; Table; Table 5-5 Software Available On System Components - Emerson AXP 1410 Installation And Use Manual

Table 5-4 Access to System Components
Component To Be
Configured and Accessed
Switch software
Node blade software
DHCP server
configuration
5.4

Software

System components are delivered with the software installed.

Table 5-5 Software Available on System Components

Component
SAM1410
Fan trays
Node blade
PEM
AXP 1410 Installation and Use (6806800H70F)
Configuring and Operating the System
Access Via
Backplane ethernet
connections from other
blades
Out-of-band interface
on ATCA-F120
RTM-ATCA-F120 (after
RTM port configuration)
Backplane ethernet
connections from other
blades
Out-of-band interface on
ATCA-F120
Software
IPMC firmware
Boot loader (Uboot)
Linux kernel
Initial ram disk
IPMI firmware
Basic Blade Services Software including:
Operating System
Hardware management functions
Set of management routines for Linux and all hardware
interfaces
IPMI firmware
Default IP Address
192.168.21.1 or 192.168.22.1 in slot 6
192.168.21.2 or 192.168.22.2 in slot 9
No default setting, IP address as
defined by user in uboot
Node blade IP addresses are assigned
by the DHCP server
192.168.21.1 or 192.168.22.1 in slot 6
192.168.21.2 or 192.168.22.2 in slot 9
No default setting, IP address as
defined by user in uboot
95