Emerson STXPBS001 User Manual
  1. Manuals
  2. Brands
  3. Emerson Manuals
  4. Network Hardware
  5. STXPBS001
  6. User manual
Emerson STXPBS001 User Manual

Emerson STXPBS001 User Manual

Profibus network adapters
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
GFK-2746C
Sep 2019
PACSystems
TM
RSTi
PROFIBUS & PROFINET NETWORK ADAPTER
USER MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Emerson STXPBS001

Summary of Contents for Emerson STXPBS001

  • Page 1 USER MANUAL GFK-2746C Sep 2019 PACSystems RSTi PROFIBUS & PROFINET NETWORK ADAPTER USER MANUAL...

  • Page 2: Table Of Contents

    2.3.1 RSTi Bus Data Pin & Field Power Pin Description ........10 2.3.2 RSTi Data Bus System ................10 Chapter 3: PROFIBUS Network Adapters ....... 12 STXPBS001 ......................13 3.1.1 Interface ....................13 3.1.2 Specifications ..................14 STXPBS* ......................16 3.2.1 Interface ....................
  • Page 3 Appendix C: Product Certifications and Installation Guidelines for Conformance ................75 Important Notes ....................75 Safety Notes ...................... 75 Certifications ..................... 75 Government Regulations ................... 76 Environmental Specifications ................76 C-5.1 PROFIBUS STXPBS001 & STXPBS* ............76 C-5.2 PROFINET STXPNS001 ................77 C-5.3 Abbreviations ..................77 Contents...
  • Page 4 Changes, modifications, and/or improvements to equipment and specifications are made periodically and these changes may or may not be reflected herein. It is understood that Emerson may make changes, modifications, or improvements to the equipment referenced herein or to the document itself at any time.

  • Page 5: Chapter 1: Introduction

    User Manual Chapter 1 GFK-2746C Sep 2019 Chapter 1: Introduction The PACSystems RSTi Network Interface and I/O family provides a cost effective, modular distributed I/O system. The RSTi network is ideally suited for distributed applications such as water/wastewater, process control, packaging and assembly. You can easily add RSTi modules to the system to build functional remote I/O stations to meet your application requirements.

  • Page 6: I/O Station Capacity

    The sum of all input and output data can be up to: 504 bytes per station for a PROFINET network — 256 bytes / 72 bytes per station for a PROFIBUS network (for STXPBS001, 256 — bytes and for STXPBS with Integrated IO, 72 bytes) •...

  • Page 7: I/O Guidepro Tool For Configuration & Monitoring

    List of RSTi Network adapters RSTi PROFIBUS Network Adapters: • STXPBS001 PROFIBUS DP/V1 network adapter • STXPBS032 32-point Positive Logic Input •...

  • Page 8: List Of Rsti Network Adapters

    User Manual Chapter 1 GFK-2746C Sep 2019 • STXPBS532 16 Negative Logic in/16 Negative Logic out • STXPBS824 16 Positive Logic in/8 relay out • STXPBS924 16 Negative Logic in/8 relay out • STXPBS825 16 Positive Logic in/8 relay out isolated •...

  • Page 9: Chapter 2: Installation

    User Manual Chapter 2 GFK-2746C Sep 2019 Chapter 2: Installation WARNING • Installing or removing modules or wiring with power applied to the system or field wiring can cause an electrical arc. This can result in unexpected and potentially dangerous action by field devices. Arcing is an explosion risk in hazardous locations. Be sure that the area is non-hazardous or remove power appropriately before installing or removing modules or wiring.

  • Page 10: Module Mounting

    User Manual Chapter 2 GFK-2746C Sep 2019 Module Mounting 2.1.1 How to Mount on DIN Rail Press down the module lightly on the DIN Rail until it clicks & locks. Figure 2: Pressing down the module lightly You can use the PUSH lock for DIN rail up as a second locking mechanism. Figure 3: PUSH lock as a second locking mechanism Installation...

  • Page 11: How To Dismount From Din Rail

    User Manual Chapter 2 GFK-2746C Sep 2019 2.1.2 How to dismount from DIN Rail Pull down the locking mechanism by using small flat screw driver as in the following figures. Figure 4: Pulling down the lock Pull up the module to remove from the DIN rail. Figure 5: Pulling up the module Installation...

  • Page 12: How To Mount And Dismount Network Adapter With Integrated I/O

    User Manual Chapter 2 GFK-2746C Sep 2019 2.1.3 How to mount and dismount Network adapter with Integrated I/O Figure 6: module mounting/dismounting instructions Release the DIN rail locking clip by pulling clip downward with a small-bladed screwdriver. The clip will click and lock into the open position. Install the module on the DIN rail firmly. Once module is in place on the DIN rail, push the clip upward to secure the module on the DIN rail.

  • Page 13: Installing And Removing Components

    User Manual Chapter 2 GFK-2746C Sep 2019 Installing and Removing Components To plug in the module, use a small-bladed screwdriver and push down the locking lever located at bottom of the module. Install the module on DIN rail firmly; push up the locking lever to lock.

  • Page 14: Rsti Bus Data Pin & Field Power Pin Description

    User Manual Chapter 2 GFK-2746C Sep 2019 WARNING Do not touch data and field power pins, in order to avoid damage by ESD noise. 2.3.1 RSTi Bus Data Pin & Field Power Pin Description Table 1: RSTi Bus Pin Name and Description Name Description System supply voltage (5V dc)
  • Page 15 User Manual Chapter 2 GFK-2746C Sep 2019 Adapter Modules: PROFIBUS, CANopen, DeviceNet, Ethernet/IP, CC-Link, MODBUS/Serial, MODBUS/TCP, PROFINET etc. • IO Module: The IO Modules are supported by a variety of input and output field devices. There are digital and analog input/output modules and special function modules.

  • Page 16: Chapter 3: Profibus Network Adapters

    PROFIBUS Network Adapters include STXPBS001 and STXPBS* modules. • STXPBS001 The following are the features of STXPBS001: STXPBS001 is connected with the PROFIBUS-DP by means of 9 Pin D-sub — Connector. It works as a slave in the Master/Slave environment.

  • Page 17: Stxpbs001

    3.1.1 Interface The following figure shows the interface diagram for STXPBS001. Figure 10: PROFIBUS Network Adaptor Module: STXPBS001 The following table lists the pin numbers and their description for STXPBS001. Table 2: STXPBS001: Pin Description Pin Number Description Pin Number...

  • Page 18: Specifications

    User Manual Chapter 3 GFK-2746C Sep 2019 3.1.2 Specifications The following table describes the specifications of STXPBS001. Table 3: STXPBS001: Interface Specifications Item Specification Network Type PROFIBUS-DP Network Cable PROFIBUS-DP Special Cable Cable Length 1.2Km ~ 100m Maximum Station No.
  • Page 19 User Manual Chapter 3 GFK-2746C Sep 2019 Table 4: STXPBS001: General Specifications Item Specification Supply voltage: 24Vdc nominal System Power Supply voltage range: 11~28.8Vdc Protection: Output current limit (1.5A) Reverse polarity protection Power Dissipation 60mA typical @24Vdc Current for I/O Module 1.5A @5Vdc...

  • Page 20: Stxpbs

    User Manual Chapter 3 GFK-2746C Sep 2019 STXPBS 3.2.1 Interface STXPBS032 – Adapter with 32 pt Positive Logic Input The following figure shows the interface diagram for STXPBS032. Figure 11: PROFIBUS Network Adaptor Module: STXPBS032 Table 5: STXPBS032: Pin Description Pin Number Description Pin Number...
  • Page 21 User Manual Chapter 3 GFK-2746C Sep 2019 STXPBS132 – Adapter with 32pt Negative Logic Input The following figure shows the interface diagram for STXPBS132. Figure 12: PROFIBUS Network Adaptor Module: STXPBS132 Table 6: STXPBS132: Pin Description Pin Number Description Pin Number Description 01-0 Input Channel 0...
  • Page 22 User Manual Chapter 3 GFK-2746C Sep 2019 STXPBS232 – Adapter with 32-point Negative Logic Output The following figure shows the interface diagram for STXPBS232. Figure 13: PROFIBUS Network Adaptor Module: STXPBS232 Table 7: STXPBS232: Pin Description Pin Number Description Pin Number Description 01-0 Output Channel 0...
  • Page 23 User Manual Chapter 3 GFK-2746C Sep 2019 STXPBS332 – Adapter with 32-point Positive Logic Output The following figure shows the interface diagram for STXPBS332. Figure 14: PROFIBUS Network Adaptor Module: STXPBS332 Table 8: STXPBS332: Pin Description Pin Number Description Pin Number Description 01-0 Output Channel 0...
  • Page 24 User Manual Chapter 3 GFK-2746C Sep 2019 STXPBS016 – Adapter with 16 relay output The following figure shows the interface diagram for STXPBS016. Figure 15: PROFIBUS Network Adaptor Module: STXPBS016 Table 9: STXPBS016: Pin Description Pin Number Description Pin Number Description 01-0 Relay Output 0...
  • Page 25 User Manual Chapter 3 GFK-2746C Sep 2019 STXPBS116 – Adapter with 16 relay output isolated The following figure shows the interface diagram for STXPBS116. Figure 16: PROFIBUS Network Adaptor Module: STXPBS116 Table 10: STXPBS116: Pin Description Pin Number Description Pin Number Description 01-0 Relay Output 0...
  • Page 26 User Manual Chapter 3 GFK-2746C Sep 2019 STXPBS432 – Adapter with 16 Positive Logic in/16 Negative Logic out The following figure shows the interface diagram for STXPBS432. Figure 17: PROFIBUS Network Adaptor Module: STXPBS432 Table 11: STXPBS432: Pin Description Pin Number Description Pin Number Description 01-0...
  • Page 27 User Manual Chapter 3 GFK-2746C Sep 2019 STXPBS532 – Adapter with 16 Negative Logic in/16 Negative Logic The following figure shows the interface diagram for STXPBS532. Figure 18: PROFIBUS Network Adaptor Module: STXPBS532 Table 12: STXPBS532: Pin Description Pin Number Description Pin Number Description 01-0...
  • Page 28 User Manual Chapter 3 GFK-2746C Sep 2019 STXPBS824 – Adapter with 16 Positive Logic in/8 relay out The following figure shows the interface diagram for STXPBS824. Figure 19: PROFIBUS Network Adaptor Module: STXPBS532 Table 13: STXPBS824: Pin Description Pin Number Description Pin Number Description 01-0...
  • Page 29 User Manual Chapter 3 GFK-2746C Sep 2019 STXPBS924 – Adapter with 16 Negative Logic in/8 relay out The following figure shows the interface diagram for STXPBS924. Figure 20: PROFIBUS Network Adaptor Module: STXPBS924 Table 14: STXPBS924: Pin Description Pin Number Description Pin Number Description 01-0...
  • Page 30 User Manual Chapter 3 GFK-2746C Sep 2019 STXPBS825 – Adapter with 16 Positive Logic in/8 relay out isolated The following figure shows the interface diagram for STXPBS825. Figure 21: PROFIBUS Network Adaptor Module: STXPBS825 Table 15: STXPBS825: Pin Description Pin Number Description Pin Number Description 01-0...
  • Page 31 User Manual Chapter 3 GFK-2746C Sep 2019 STXPBS925 – Adapter with 16 Negative Logic in/8 relay out isolated The following figure shows the interface diagram for STXPBS925. Figure 22: PROFIBUS Network Adaptor Module: STXPBS925 Table 16: STXPBS925: Pin Description Pin Number Description Pin Number Description 01-0...

  • Page 32: Stxpbs Specifications

    User Manual Chapter 3 GFK-2746C Sep 2019 3.2.2 STXPBS Specifications Table 17: STXPBS: Interface Specifications Item Specification Network Type PROFIBUS-DP Network Cable PROFIBUS-DP Special Cable Cable Length 1.2Km ~ 100m Maximum Station No. 99 Station (Include Master Scanner) Station Type PROFIBUS-DP Slave Expansion No.
  • Page 33 User Manual Chapter 3 GFK-2746C Sep 2019 Table 18: STXPBS: General Specifications Item Specification System Power Supply voltage: 24Vdc nominal Supply voltage range: 19.2~28.8Vdc Protection: Current limit, Reverse polarity protection Power Dissipation 50mA typical @24Vdc Current for I/O Module 0.4A @5Vdc Isolation System Power to internal logic: Non-isolation, Internal logic to I/O driver: Isolation...
  • Page 34 User Manual Chapter 3 GFK-2746C Sep 2019 Table 19: STXPBS Input/Output/Relay Module Specifications Model 332 432 STXPBS* Input Specification Number of 32 Points 16 Points 16 Points Input Type Positive Negative Positive Negative Positiv Negative Positive Negative Logic Logic Logic Logic e Logic Logic...

  • Page 35: Led Indicators

    User Manual Chapter 3 GFK-2746C Sep 2019 Model 332 432 STXPBS* 0.5V@2.0A, Resistive Load, 24Vdc Minimum On- Stage Voltage Drop Output Delay Maximum 10ms Time 30mΩ Initial Contact Resistance Expected 300K Cycle Resistive, 100K Cycle Inductive Contact Life Common Type 4 Point / 1 COM 1 Point / 1 COM Point/1C...

  • Page 36: Dimensions

    Not Supplied Field Power Not supplied 24V dc field power Solid Green Supplied Field Power Supplied 24V dc field power 3.2.4 Dimensions STXPBS001 Dimension The following figure displays the dimension for STXPBS001. Figure 23: Dimension for STXPBS001 PROFIBUS Network Adapters...

  • Page 37: Profibus Communication Interface

    Figure 24: Dimension for STXPBS* Total IO The number of the module assembly that can be connected is 32 for STXPBS001 and 8 for STXPBS*. The maximum length is 426mmm and 179mm respectively. (These maximum length figures are considering all single wide modules. These values need to be adjusted if double wide modules like ST-2748 are considered) 3.2.5...

  • Page 38: Choice Of Profibus Data Transfer Cable Type

    User Manual Chapter 3 GFK-2746C Sep 2019 All Fieldbus devices which use a standard 9-pin Sub-D connector should provide the VP and DGND signals on the bus connector in addition to receive and transmit signals. With all other connector types, only receive and transmit signals need to be connected. Make sure that the connector type used is suitable for the selected baud rate.
  • Page 39 User Manual Chapter 3 GFK-2746C Sep 2019 • Parameters for standard type A bus cables: Table 25: Parameters for Standard Type A Bus Cables Parameter Cable Type A Characteristic impedance in Ω 135..165 at a frequency of (3..20MHz) Operating capacity(pF/m) <...

  • Page 40: Profibus Module Configuration

    PROFIBUS qualified products. Station Address and Quick Startup Mode Setup Station Address Setup for STXPBS001 Each PROFIBUS Adapter must have a unique address (from 1 to 99) so that it can be addressed independently from other nodes. The address 0 is reserved to identify a broadcast exchange.
  • Page 41 Power cycle the module and download the new assigned station number to restore communication. • Communication Speed Setting Refer to Emerson PROFIBUS master module settings to change the — communication speed. Station Address Setup for STXPBS Each PROFIBUS Adapter must have a unique Node Station address (from 0 to 99) so that it can be addressed independently from other nodes.
  • Page 42 If a DP Slave device does not appear in the selection list, a corresponding GSD file can be added as shown below: Right click on the Emerson PROFIBUS master and choose “add slave”, a pop-up window will open showing the available slave modules.

  • Page 43: Configuring An I/O Station For Profibus Communication

    Choose the desired slave device or choose “Have Disk” to add other slave devices. Now click on “Toolchest”, choose “PROFIBUS Devices”, select the desired network adapter and hit F1 to see the contents of the GSD file. For latest GSD file, please visit Emerson support site. Figure 31: Contents of GSD file 3.2.8...
  • Page 44 Assign a name, description and station address for the I/O station. Select the Modules tab and add the desired I/O modules as per the application. Ensure that the first module is always STXPBS001 or STXPBS (in case you have selected network adapter as STXPBS at position”0”.
  • Page 45 Fault” should be set to “Power restart” for this parameter to behave appropriately. Note that in order to observe a “loss of Device” in IO fault table, the “slave status Fault table entries” must be set to “true” in the Emerson IP PROFIBUS master settings tab as shown below:...
  • Page 46 DPV1 services to read write network adapter configuration parameters. The PROFIBUS network adapter also supports DPV1 service. The details are as below: DPV1 Write service • Slot#=0, Index 1: Write STXPBS001 extension parameter(2Byte) • Slot#0~31, Index 1: Write parameter for an IO module. PROFIBUS Network Adapters...
  • Page 47 Data Ln=Length for data to be written Data [0] ~Data[n] =User data List of valid commands for (Slot#=0, Index 1: Write STXPBS001 extension parameter (2 bytes). Note that the length of parameter may vary depending upon the module chosen for STXPBS* Network adapter with Integrated IO modules and hence the command word.
  • Page 48 User Manual Chapter 3 GFK-2746C Sep 2019 Command Reaction to Bus DP Clear Action Word data Restart on Bus Fault Format fault Binary 00 05 00000000 01: Clear Input data 01: Bus Run (clear Output) 00:INTEL 00:Power reset 00000101 00 15 00000000 01: Clear Input data 01: Bus Run (clear Output)
  • Page 49 User Manual Chapter 3 GFK-2746C Sep 2019 DPV1 Read service • Slot#=0, Index 1: Read STXPBS001 extension parameters (2Byte) • Slot#1~32, Index 1: Read parameter for an IO module. • Slot#1~32, Index 2: Read memory data from an IO module. •...

  • Page 50: I/O Process Image Map

    The following figure shows the data flow between network adapter and IO modules for STXPBS001. Figure 38: STXPBS001: Data flow between Network Adapter and IO Modules The following figure shows the data flow of process image between network adapter and IO modules for STXPBS*.
  • Page 51 User Manual Chapter 3 GFK-2746C Sep 2019 Figure 39: STXPBS*: Data flow between Network Adapter and IO Modules Example of Input Process Image Map Input image data depends on slot position and IO Module data type. Figure 40: Slot Configuration PROFIBUS Network Adapters...
  • Page 52 User Manual Chapter 3 GFK-2746C Sep 2019 The following table lists the slot number and module description. Table 28: Slot number and Module Description Slot Address Module Description STXPBS032 32-discrete input (4byte) 4-discrete Input (4 bit) 16-discrete Input (2 byte) 4-analog Input (4 word) 2-analog output (2 word) •...
  • Page 53 User Manual Chapter 3 GFK-2746C Sep 2019 Example of Output Process Image Map Figure 41: Slot Configuration The following table lists the slot number and module description. Table 30: Slot number and Module Description Slot Address Module Description STXPBS032 32-discrete input (4 byte) 2-discrete Input (2 bit) 4-discrete Input (4 bit) 16-discrete output (2 byte)

  • Page 54: Stxpbs001: Dpv1 Service Specification

    Analog Output Ch0 low byte (Slot#4) Byte 9 Analog Output Ch0 high byte (Slot#4) Byte 10 Analog Output Ch1 low byte (Slot#4) Byte 11 Analog Output Ch1 high byte (Slot#4) STXPBS001: DPV1 Service Specification 3.3.1 Supported Service • MSAC1 Read • MSAC1 Write •...

  • Page 55: Msac1 Write (Profibus-Dp Extensions To En 50170)

    3.3.3 MSAC1 Write (PROFIBUS-DP Extensions to EN 50170) • MSAC1 Write Request Parameter Description Remote Address Slave Address (0~99) Slot Number Slot Number (0~32), 0: STXPBS001 Index 1: Parameter 2: Memory Length 1~128 Parameter Memory • Data[0]: Offset Low •...

  • Page 56: Msac2 Initiate (Profibus-Dp Extensions To En 50170)

    User Manual Chapter 3 GFK-2746C Sep 2019 3.3.4 MSAC2 Initiate (PROFIBUS-DP Extensions to EN 50170) • MSAC2 Initiate Request Parameter Description C_Ref PROFIBUS-DP Extensions to EN50170 Rem_Add Slave station address(0~99) Send Timeout PROFIBUS-DP Extensions to EN50170 Features_Supported_1 0x03 Features_Supported_2 Reserved Profile_Features_Supported_1 PROFIBUS-DP Extensions to EN50170 Profile_Features_Supported_2...

  • Page 57: Msac2 Read (Profibus-Dp Extensions To En 50170)

    MSAC2 Read Request Parameter Description C_Ref Communication-Reference Slot Number Slot Number (0~32), 0: STXPBS001 1~32 : IO Index 1: Parameter 2: Memory 252: IO Module Vendor code (Not used by user) 253: Revision (Not used by user) 254: Vendor code (Not used by user)

  • Page 58: Msac2 Write (Profibus-Dp Extensions To En 50170)

    3.3.7 MSAC2 Write (PROFIBUS-DP Extensions to EN 50170) • MSAC2 Write Request Parameter Description Remote Address Slave Address (0~99) Slot Number (0~32), Slot Number 0: STXPBS001 1: Parameter Index 2: Memory Length 1~128 Parameter Memory • Data[0]: Offset Low •...

  • Page 59: Error Decode (Profibus-Dp Extensions To En 50170)

    3 Resource unavailable − 4 ~7: Reserved − 8~15: User specific • Error Class • Error code − 0xD : STXPBS001 Specific Class − 1: Slot Parameter write error − 2: Read memory error − 3: Write memory error PROFIBUS Network Adapters...

  • Page 60: Diagnostics

    User Manual Chapter 3 GFK-2746C Sep 2019 3.3.10 Diagnostics Byte Item Description Station status 0 PROFIBUS Standard Diagnostic Station status 0 Station status 0 Master Address PNO Ident Number High PNO Ident Number Low ID Diagnostic Header Extended Diagnostic (ID Related Diagnostic) Diagnostic allocation (Slot0~7) Diagnostic allocation (Slot8~15)
  • Page 61 User Manual Chapter 3 GFK-2746C Sep 2019 0x2A: Response error (Sequence) — 0x2B: STXPBS001 Request error — 0x2C: STXPBS001 Broadcasting error — 0x41: RSTi bus Rx Timeout — 0x42: Faulty input data (Type) — 0x43: Faulty input data (Slot number) —...
  • Page 62 User Manual Chapter 3 GFK-2746C Sep 2019 0xE9: Set RSTi bus parameter error — 0xEA: Slot warm-start error — 0xEB: Get slot catalog number error — 0xEC: Invalid slot request — 0xED: Firmware fault — 0xEE: Set word-type error — 0xF0: Vendor code fault —...

  • Page 63: Chapter 4: Profinet Network Adapter

    User Manual Chapter 4 GFK-2746C Sep 2019 Chapter 4: PROFINET Network Adapter STXPNS001 4.1.1 Interface The following figure shows the interface design for STXPNS001. Figure 42: PROFINET Network Adaptor Module: STXPNS001 The following table lists the pin numbers and their description for STXPNS001. Table 32: STXPNS001: Pin Description Pin Number Description Pin Number...

  • Page 64: Stxpns001 Specifications

    User Manual Chapter 4 GFK-2746C Sep 2019 4.1.2 STXPNS001 Specifications The following table describes the Interface Specifications and General Specifications of STXPNS001. Table 33: STXPNS001: General and Environment Specifications Items Specification Communication Interface Specifications Protocol PROFINET IO RT Station type PROFINET IO Device Topology Line or Star topology...

  • Page 65: Stxpns001 Led Indicators

    User Manual Chapter 4 GFK-2746C Sep 2019 4.1.3 STXPNS001 LED Indicators Module Status LED (MOD) Table 34: STXPNS001: Module Status LED Color Status Function Power off H/W Fault No power is supplied to the unit. Solid Green Invalid boot image header The unit has occurred unrecoverable fault (Flash), ROM Boot loader in self-testing.
  • Page 66 User Manual Chapter 4 GFK-2746C Sep 2019 IO Module Status LED (I/O) Table 36: STXPNS001: IO Status LED Color Status Function Not Powered Device has no IO module or may not be powered No IO Module Flashing Green RSTi Bus On-line RSTi Bus is on-line but does not exchanging I/O data Solid Green RSTi Bus Connection...

  • Page 67: Stxpns001 Dimension

    User Manual Chapter 4 GFK-2746C Sep 2019 4.1.4 STXPNS001 Dimension The following figure displays the dimension for STXPNS001. Figure 43: Dimension for STXPNS001 Total IO The number of the module assembly that can be connected is 32. The maximum length is 426mm.

  • Page 68: Profinet Module Configuration

    User Manual Chapter 4 GFK-2746C Sep 2019 The following table describes the Signal Name and Description. Table 39: Signal name and Description RJ-45 Signal Name Description Transmit + Transmit - Receive + Receive - Case Shield WARNING The use of an incorrect supply voltage or frequency can cause severe damage to the component.
  • Page 69 User Manual Chapter 4 GFK-2746C Sep 2019 Do not insert any other devices or components (such as transistor) into PROFINET field bus or besides PROFINET qualified products. PROFINET Parameterization by Rotary Switch Table 40: Rotary switch: Values and Description Value Description Factory Setting −...
  • Page 70 GSD file. In this case, the second device has the extension "-1", the third one has the extension "- 2", and so on. • Communication Speed Setting Refer to Emerson PROFINET master module settings to change the — communication speed (Emerson PROFINET Controller User Manual- GFK- 2571).

  • Page 71: Configuring An I/O Station For Profinet Communication

    Configuring an I/O Station for PROFINET Communication To configure I/O station, add a Emerson PROFINET master module at the desired slot in the RX3i PAC Machine Edition project. Ensure that you have the latest GSDML file imported. Right click on master module and choose “Add IO Device”. Select “STXPNS” for PROFINET Network adapter and Select “OK”.
  • Page 72 User Manual Chapter 4 GFK-2746C Sep 2019 In order to add IO modules in this node, right click on recently added network adapter node and select “Change Module List”; a pop-up window will open as shown below: Figure 49: Change Module List Now start adding the IO modules as per the physical setup;...
  • Page 73 User Manual Chapter 4 GFK-2746C Sep 2019 Choose “STXPNS Parameters” for parameter settings. There are three options: Word Data Format: The options are MOTOROLA & INTEL. MOTOROLA format is big endian; therefore, ensure that the IO modules connected to the node are configured with "False"...
  • Page 74 User Manual Chapter 4 GFK-2746C Sep 2019 Reaction to Bus Error: If Bus error is detected, the behavior of the network module will be as per the options selected below: a. Clear Input Image: Input values will be zero. NET LED will be Green. Network adaptor communication with master intact.

  • Page 75: Appendix A: Diagnostics

    User Manual Appendix A GFK-2746C Sep 2019 Appendix A: Diagnostics How to Diagnose when Device Cannot Communicate with the Network • Verify that cable connections are correct. • If terminator resistor is not installed, install terminator resistor. Check location of terminator resistor.

  • Page 76: Appendix B: Product List

    User Manual Appendix B GFK-2746C Sep 2019 Appendix B: Product List Table 42: Product List ST-Number Description ID(hex) Production Status Digital Input Modules ST-1114 4 Points, Sink (Positive), 5Vdc 41 00 01 Active ST-1124 4 Points, Source (Negative), 5Vdc 41 00 02 Active ST-1214 4 Points, Sink (Positive), 12V/24Vdc...
  • Page 77 User Manual Appendix B GFK-2746C Sep 2019 ST-Number Description ID(hex) Production Status ST-3544 4 Channels, Voltage, -10Vdc~10Vdc, 14bit 41 43 23 Active ST-3624 4 Channels, Voltage, 0~5Vdc, 12bit 41 43 24 Active ST-3644 4 Channels, Voltage, 0~5Vdc, 14bit 41 43 25 Active ST-3702 2 Channels, RTD, Status...
  • Page 78 User Manual Appendix B GFK-2746C Sep 2019 ST-Number Description ID(hex) Production Status ST-7641 1 Channel, Field Distributor, 5Vdc~48Vdc, 02 00 E2 Active 120Vac~240Vac, ID Type Product List...

  • Page 79: Appendix C: Product Certifications And Installation Guidelines For Conformance

    In no event will Emerson be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.

  • Page 80: Government Regulations

    Note: This Class A digital apparatus complies with Canadian ICES-003. Environmental Specifications C-5.1 PROFIBUS STXPBS001 & STXPBS* Table 43: Environmental specification for STXPBS001 Items Specification Operating Temperature 0℃ to 55℃ for UL applications; 0℃ to 60℃ for non-UL applications Storage Temperature Storage -40℃...

  • Page 81: C-5.2 Profinet Stxpns001

    User Manual Appendix C GFK-2746C Sep 2019 C-5.2 PROFINET STXPNS001 Table 44: Environmental specification for STXPNS001 Items Specification Operating Temperature 0℃ to 55℃ for both UL and non UL applications. Non-Operating -40°C to 85°C Temperature Relative Humidity 5% ~ 90% Non-condensing Protection Class IP20 Mounting...
  • Page 82 Note: If the product is purchased through an Authorized Channel Partner, please contact the seller directly for any support. Emerson reserves the right to modify or improve the designs or specifications of the products mentioned in this manual at any time without notice.

This manual is also suitable for:

Stxpbs032Stxpbs132Stxpbs232Stxpbs332Stxpbs016Stxpbs116 ... Show all

Table of Contents