CMD + SHIFT CLICK TO CHANGE COPY
If the display is not illuminated
• Check to see whether the Coffee Brewer
is plugged into a grounded outlet. If it
is, check the fuse or circuit breaker on
the electrical circuit the Coffee Brewer
is connected to and make sure the
circuit is closed.
If only a portion of the water
added to the Coffee Brewer
• The Coffee Brewer requires immediate
descaling. Please refer to "Descaling
the Coffee Brewer" in the "Care and
If the entire display flashes
• There is no water in the water tank.
Press BREW to cancel the flashing and
let the Coffee Brewer cool down for
approximately 10 minutes. Fill the water
tank to the desired number of cups with
fresh, cool water and continue with
the brewing cycle as described in the
"Brewing coffee" section.
If the problem cannot
• See the "Warranty and service" section.
Do not return the Coffee Brewer to the
retailer; retailers do not provide service.