Programming The Clock; Operating The Coffee Brewer Programming The Clock - KitchenAid 5KCM0802 Manual

CMD + SHIFT CLICK TO CHANGE COPY OPERATING THE COFFEE BREWER

Programming the clock

When the Coffee Brewer is plugged in,
1
the clock display will begin to flash.
The minute display will start to flash
3
next. Use the "+" or "-" toggle bar to
choose the correct minute setting, then
press SET to make your selection.
NOTE: To go directly to the clock display menu, when the Coffee Brewer is already on,
press the MENU button four times, until the hour display begins to flash.
12
With the hour display flashing, use the
2
"+" or "-" toggle bar to choose the
correct hour setting. Then press SET
to make your selection.
The AM/PM display will flash last. Use
4
the "+" or "-" toggle bar to choose the
correct AM/PM setting, then press SET
to go back to the programming menu.