Care And Cleaning - Toto Renesse TL170SD Owner's Manual

Installation of the Pop-up Drain with Cable
1) Apply pipe tape to the threads of the
drain body.
2) Insert the drain body into the drain
hole of the lavatory.
3) Assemble the gasket, flange nut and
lock nut to the drain body.
4) Apply pipe tape to the end threads
of the drain body and fasten the tail
piece.
NO TE: Make sure that the cable faces
towards the faucet.
5) Connect the cable base connector
with the cable handle connector.
Cable Handle
Connector
Clip
Cable Base
Connector
Groove, to which
the connection is
to be made.
Clip
Your new faucet is designed for years of trouble-free performance. Keep it
looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth. Do not use abrasive
cleaners, steel wool or harsh chemicals, as these will dull the finish. Failure
to follow these instructions may void your warranty.
(For TL170SDLQ only)
Drain Lever
Press the clip
to be able to
connect
Cable
Drain Body
U-cup Seal
CARE & CLEANING
Drain Body
Lock Nut
Drain Body
Lock Nut
Tailpiece
Faucet
Handle
Tailpiece
5
Flange
Drain Gasket
Flange Nut
Lavatory
Cable
Drain Lever
Cable Handle
Connector
Cable Base
Connector
Cable