Table Of Contents; Thanks For Choosing Toto; Warnings - Toto Renesse TL170SD Owner's Manual

Thanks for Choosing TOTO
Warnings ............................................................................................................... 2
Included Parts ...................................................................................................... 3
Before Installation ................................................................................................ 3
Installation Procedure ....................................................................................... 4-5
Care and Cleaning ............................................................................................... 5
Warranty................................................................................................................ 6
Rough-In Dimensions ....................................................................................... 17
Spare Parts.......................................................................................................... 18
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.
For safe operation of the faucet, please observe the following:
„ Operating pressure:
Minimum Pressure...............20 psi (flowing pressure)
ƒ
ƒ Maximum Pressure...............80 psi (non-flowing pressure)
„ Do not reverse the hot and cold water inlets.
„ Do not use a hot water supply that is higher than 185˚F (85˚C).
„ Do not disassemble or modify the faucet in any way not described in this
manual.
„ While using the hot water, do not touch the spout or spout body directly.
„ Do not strike or kick the faucet.
„ Check for water leakage or looseness in the pipes regularly.
„ If the water supply pressure is higher than 80psi (0.55MPa), you should
buy a reducing valve to reduce the pressure to the range of 20-45psi
(0.2-0.3MPa). The recommended pressure for normal, comfortable use is
about 0.2-0.3MPa.
„ To prevent being scalded due to malfunction, the water supply pressure
must be higher than the hot water pressure, or you can make them equal.
In addition, if you increase the pressure of the hot water, it must still be
lower than that of water supply side.
„ To prevent being scalded due to malfunction, the recommended hot
water supply temperature is 140°F (60°C).

TABLE OF CONTENTS

! ............................................................................. 2
®
THANKS FOR USING TOTO!

WARNINGS

2