Care & Cleaning - Toto THU669 Installation And Owner's Manual

After using the travel washlet:
Confirm that there is no water left remaining in the
tank. *If there is some water still remaining in the
tank, turn the switch ON and discharge all of the
water from the tank.
1. Pull the wand out from the main unit and wash
the wand with water. Wipe the wand dry and
insert the protruding end of the wand into the
hole in the main unit until it is tightly inserted.
2. Fold the wand down in the direction of the arrow
for storage.
3. Push the main unit with the palm of your hand
into the tank, as shown in the drawing.
Do not use force when pushing the main unit into the
tank as this may result in jamming of the fingers!
4. Place the main unit into the carrying pouch for
storage. Be sure to wipe the device completely
dry before placing it in the pouch.
For ordinary cleaning, use a soft damp cloth to wipe the exterior of the
product. For heavy duty cleaning, use a soft cloth dipped in diluted dish
detergent for wiping the exterior of the product. *Use of toilet cleaner,
benzene or powdered cleanser will scratch the surface of the product.
Always use tap water or water that is safe for drinking when washing the
inside of the tank. Do not use boiling water or harsh chemicals to wash your
Travel Washlet as this may result in irritation or skin burns!
Cleaning the strainer
Insert a toothbrush or small paintbrush, etc.
through the opening in the tank to clean the
strainer. A monthly cleaning of the strainer
is recommended to ensure proper water
pressure.
Cleaning the wand cover
Use a toothbrush to remove any dirt or residue
that may get lodged in the grooves of the
wand cover. *Do not remove the wand cover to
avoid damaging the main unit.
OPERATIONAL PROCEDURE
CARE & CLEANING
6
Protruding
end of wand
Strainer
Hole on the
main unit
Toothbrush,
etc.
Toothbrush
Wand Cover