14. Assembly
i
The Troll Standard is designed for flush-mounted installation.
For this, you require a 58 mm flush-mounted box. We
recommend using a deep box.
[ 2 ]
[ 1 ]
18
1.
2.
3.
4.
5.
6.
[ 5 ]
7.
[ 3 ]
Installation procedure:
Switch off the mains.
Make the electrical connection according to the wiring diagram
(see page 17).
Route the power cables to the flush-mounted box.
Slide the installation housing [ 3 ] into the flush-mounted box and
clamp the claws [ 5 ] in place with the screws provided.
Fit the frame [ 2 ].
Carefully insert the operating unit [ 1 ] into the installation
housing [ 3 ].
Switch the mains power again back on again.
EN