23. Dismantling
i
During both installation and dismounting of the Troll
Standard, there is a risk of fatal electric shocks.
Follow the safety instructions for electrical connection
on page 16.
44
Procedure for dismantling:
1.
Switch off the mains.
2.
Secure the connector against reconnection and check that the
system is de-energised.
3.
Carefully remove the operating unit [ 1 ] from the installation
housing [ 3 ].
4.
Remove the frame [ 2 ].
5.
Release the installation housing [ 3 ] from the flush-mounted
box and disconnect from the mains lead.
6.
Leave the connector so that it is secured against reconnection
or fit with a new unit if required.
EN