Table of Contents
Advertisement
CHAPTER -4: PREPARING THE MACHINE FOR USE
Adjusting salt consumption
Table of Water Hardness Level Settings
Water
German
hardness
hardness
level
level dH
1
0-5
2
6-11
3
12-17
4
18-22
5
23-34
6
35-50
If the hardness of the water you use is above 90 dF (French hardness) or if you are using well water; you are
recommended to use filter and water refinement devices.
NOTE: Hardness level is adjusted to level 3 as a factory setting.
Adjusting salt consumption
Adjust the water softener according to how hard your tap water
After resetting your machine, press the program selector button and keep it pressed down. (3)
Meanwhile, energise the machine by pressing the Power On/Off button. (1)
Keep the program selection button pressed until the leds "P1-P2-P3"are on and off. (3)
After the leds " P1-P2-P3-" have flashed (2) , release the program selector button . (3)
Your machine displays the latest entered water hardness setting.
You can adjust the levels by program selector button (3) according to Table of Water Hardness Level Settings.
After adjusting the water hardness level , press on/off button to save the settings in memory. (4)
Detergent usage
Use a detergent specifically designed for use in domestic dishwashers.
You can find powder,gel,and tablet detergents that have been designed for household dishwashers.
Detergent should be put into the compartment prior to starting the machine. Keep your detergents in cool, dry
places out of reach of your children.
Do not overfill the detergent compartment; otherwise it may cause scratches on your glasses as well as lead to
a poorly dissolved detergent.
Should you need more information concerning the detergent you will use, contact the detergent manufacturers
directly.
Filling the detergent compartment
Push the latch to open the detergent container as shown in the image. 1 The Detergent pod has level lines
inside. The Detergent pod can take a total of 40 cm
the larger compartment b 25 cm
very long time with, dried food waste on them or the dishwasher has been overloaded pour a 5cm
into the prewash compartment and start the machine. You may have to add more detergent into your machine,
depending on the degree of soil and on the water hardness level in your area.
French
British
hardness
hardness
level dF
level dE
0-9
0-6
10-20
7-14
21-30
15-21
31-40
22-28
41-60
29-42
61-90
43-63
if dishes are heavily soiled or less 15 cm
3
Hardness Level Indicator
P1 led is on.
P2 led is on.
P3 led is on.
P1 - P3 leds is on.
P2 - P3 led is on.
P1 - P2 - P3 led is on.
of detergent. Open the dishwasher detergent and pour into
3
.2 If dishes have been kept dirty for a
3
EN-12
P1
P2
P3
of detergent
3
Advertisement
Table of Contents
