Table of Contents
Advertisement
technical bulletin
1. To fix the module directly to the wall, use Figure 4 as a guide to make the two holes "B" at
the distance indicated in Figure 4.
2. Insert the dowels and mount the screws with a maximum
distance of 8 mm from the head to the wall.
3. Fix the XJ200 to the head of the screws by rotating the con-
tainer appropriately.
Fixing with the Use of Bracket
A suitable fastening bracket is included in every package to be used to:
• shelf mounting
• pipe mount fitting with appropriate retaining clamps (not supplied)
• wall mounting
As shown in the following pictures:
CAUTION!
Set the XJ200 in the desired place in a VERTICAL POSITION.
Document Part # 026-4833 Rev 0 26-FEB-2013
©2013 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emersonclimate.com/ for the latest technical documentation and updates.
XJ200 Installation and Operating Instructions
Figure 4 - Dimensions (not to scale)
Page 4 of 17
Advertisement
Table of Contents
