Configuration Import (Cfg) - Edision HDMI Modulator Xtend User Manual

<NetworkID>1<\NetworkID>
<audio _ bitrate>3<\audio _ bitrate>
<PCR _ GAP>0<\PCR_GAP>
<audio _ format>0<\audio _ format>
<videopid>1002<\videopid>
<audiopid>1001<\audiopid>
<serviceID>1000<\serviceID>
<video _ bitrate>18000<\video _ bitrate>
<Netname>EDISION<\Netname>

►CONFIGURATION IMPORT (CFG)

To import the configuration file jedi_config.txt, you must save the file within
the root directory* of a USB drive, insert the drive to the USB slot and power
cycle your HDMI modulator Xtend. When you see this message CFG, press
the MENU/OK button to confirm the import process. When the process is
completed, the unit will reboot with the new configuration!
*IMPORTANT: Use only FAT32 partitions. In any other case, the configuration file will not be read and the
device will reboot normally!
<LCN>1<\LCN>
<TSID>1<\TSID>
<ONID>1<\ONID>
<pmtpid>1003<\pmtpid>
LCN: 1 to 999
Transport Stream ID: 1 to 65534
Original Network ID: 1 to 65534
Network ID: 1 to 65534
Audio Bitrate: 0=64kbps, 1=96kbps, 2=128kbps,
3=192kbps, 4=256kbps, 5=320kbps
PCR Gap: Audio/Video sync max +-5
Audio format: 0 MPEG2 L2, 1 AAC MPEG2
Video PID: 1 to 8000
Audio PID: 1 to 8000
PMT PID: 1 to 8000
Service ID: 1 to 9999
Video Bitrate: 0 to 27000
Network Name, Max 10 characters allowed
11