Connectiον & Operation - Edision HDMI Modulator Xtend User Manual

►CONNECTIΟΝ & OPERATION
1. Connect an HDMI Cable from HDMI source device to the HDMI Modulator Xtend HD in
2. For viewing the content from the HDMI source connected to the HDMI Modulator Xtend to another HDMI
device (TV set), connect an HDMI cable from the HD OUT (6) of the HDMI Modulator Xtend, to the HDMI IN of
the TV
3. Connect an RF coaxial Cable from RF OUT to the RF Network or to an ANT IN of an MPEG4 TV.
4. As an option, the HDMI Modulator Xtend RF IN (1) can be used as a connection-mixing of the existing coaxial
network or as a connection-mixing of a network of modulators.
5. For controlling from a second TV point, connect the RF OUT(2) of the HDMI Modulator Xtend to the RF IN (A)
of the IR EDI-Rx and then from the RF OUT (D) of the EDI-Rx, to the ANT IN of the TV.
6. From the IR OUT(3) of the HDMI Modulator Xtend, connect the Jack to IR Tx cable and place it in front of the
HDMI source to be controlled via IR. Then connect the Jack to IR Rx (B) from the IR Control System EDI-Rx in
front of the second TV's IR reception point, so as to control it via IR.
7. In case there are more than one HDMI Modulator Xtend in the same installation, please choose different ID for
each one modulator (from the 50 pre-installed into the device). For each additional IR control point, you need
one IR Control System EDI-Rx.
8. Connect the ground point (8) of the HDMI Modulator Xtend to a proper grounding point.
9. Connect the power supply DC5V from the PSU to the HDMI Modulator Xtend DC power input (7).
6