Edision HDMI Modulator Xtend User Manual page 14

The channel number on the list does not appear properly
• Make sure that the TV set supports LCN (Logical Channel Numbering) functions and it is ON
• Make sure that you have selected the correct LCN type
• Make sure that the same LCN has not been selected in more than one devices
The video (image) of the HDMI Modulator Xtend appears to be from another HDMI Modulator Xtend
• Make sure the Fast Pre-Config ID does not conflict with the Fast Pre-Config ID of another unit
The sound is not synchronized with the video
• From the menu "PCR Gap", please adjust the PCR gap accordingly, until you get the perfect Audio/Video sync
The IR control at the second TV point does not work
• Make sure that the Jack to IR Tx cable is close to the HDMI source device
• Make sure that there is a clear field between the IR remote control and the Jack to IR Rx cable and the distance
between them is up to ~6 meters
• In case the LED indication of the IR Control System EDI-Rx is always ON, this may be caused by interference.
Please relocate the device
• Check the DC 5V power supply of the IR Control System EDI-Rx
• Make sure that the IR signal coaxial cable path does not include active devices such as amplifiers, multiswitches etc.
For more queries or advanced troubleshooting, please contact our technical support
at support@edision.gr
14