The NutriU App
Your Philips Blender is Bluetooth enabled and allows you to connect with the
NutriU app to gain the full blending experience. Within the app you can personalize
your blender by selecting your favorite recipes and ingredients, and the nutritional
information is displayed on the blender screen. After creating your personal profile in
the app, you will get personalized guidance, recipes and detailed nutritional information
to achieve your personal health goals.
Connecting your blender to the App
1 Download the Philips NutriU App on your smart device from the App store or from
www.philips.com/nutriu, follow the registration process and select the NutriBlend
device in the app.
2 Activate Bluetooth on your smart device (minimum Bluetooth version: 4.0).
3 Plug in the appliance and switch on the blender by pressing the rotary knob for a few
seconds.
4 Select a language on the blender.
5 Follow the setup steps on the blender and in the App.
Note
y You can connect up to 4 smart devices and profiles to your blender.
Using the blender (fig. 2)
Preparation before use
1 Put the blade unit in the collar.
2 Screw the collar onto the bottom of the blender jar.
3 Attach the blender jar by screwing it on the motor unit.
4 Plug in the device.
5 Turn the rotary knob to select the menu and press it to confirm the menu.
Note
y Precut ingredients into pieces of approximately 2x2x2cm.
Tip
y For best blending results, add ingredients in the following order.
1. Liquids (water, juice)
2. Dry goods (grains, powders)
3. Leafy greens
4. Fruits and vegetables
5. Ice and frozen ingredients
ENGLISH
11