Xavant STIMPOD MMS460 Manual page 5

Guidance and manufacturers declaration – electromagnetic emissions– for all equipment and systems
The STIMPOD NMS460 is intended for use in electromagnetic environment specified below. The customer or user of the STIMPOD NMS460 should ensure that it is used in such an environ-
ment
Emission Test
RF Emissions
CISPR 11
Guidance and manufacturers declaration – electromagnetic immunity- for all equipment and systems
The STIMPOD NMS460 is intended for use in the electromagnetic environment specified below. The customer or the user of the STIMPOD NMS460 should ensure that it is used in such an
environment
Immunity Test IEC 60601 test level
Electrostatic discharge (ESD) ± 6 kV contact
IEC 61000-4-2 ± 15 kV air
Power frequency (50/60 Hz) 30 A/m
magnetic field
IEC 61000-4-8
Compliance
Group 2 – Class A
Compliance level
± 6 kV contact
± 15 kV Air
50 Hz
30 A/m (Effective)
iv
Electromagnetic Environment – Guidance
The STIMPOD NMS460 must emit electromagnetic energy in order to per-
form its intended function. Nearby electronic equipment may be affected.
The STIMPOD NMS460 is suitable for use in all establishments, other than do-
mestic establishments and may be used in domestic establishments and those
directly connected to the public low voltage power supply network that sup-
plies buildings used for domestic purposes, provided the following warning is
heeded:
WARNING: This equipment/system is intended to be used by healthcare pro-
fessional only. This equipment/system may cause radio interference or disrupt
the operation of nearby equipment. It may be necessary to take mitigation
measures, such as re-orienting or re-locating the STIMPOD NMS460 or shield-
ing the location
Electromagnetic environment - guidance
Floors should be wood, concrete or ceramic tile. If the floors are covered with
synthetic material, the relative humidity should be at least 30%
Power frequency magnetic fields should be at levels characteristic of a typical
location in a typical commercial or hospital environment.