Powering On The System - Huawei SmartAX MA5800-X15 Quick Installation Manual

9 Powering On the System

Power on the device only when the input voltage is in the normal range.
• Use the multimeter to test the voltage between NEG(-) and RTN(+) on the DC PDU for the
device powered by -48 V DC. The voltage should range from -38.4 V to -57.6 V.
• Use the multimeter to test the voltage between NEG(-) and RTN(+) on the DC PDU for the
device powered by -60 V DC. The voltage should range from -48 V to -72 V.
Turn on the input power switches
corresponding to the service subrack.
Check the status of fan tray.
Normal status:
Green (On for 1s and off for 1s repeatedly)
18