Routing Optical Fibers (Gpon Board) - Huawei SmartAX MA5800-X15 Quick Installation Manual

7 Routing Cables

7.9 Routing Optical Fibers (GPON Board)

• When optical modules are preinstalled to boards before delivery, ensure that optical modules are
properly installed before connecting fibers to boards.
• Route the fibers of the service boards on the left of the control board to the left side of the
cabinet, and route the fibers of the service boards on the right of the control board to the right
side of the cabinet.
• When the device uses the uplink interface board for upstream transmission of services, the
optical fiber for the uplink interface board is routed in the same way as that for the control board.
To ODF To ODF
Fiber (SC)
16
Fiber
(SC)
Binding
position 1
(ports 0-4)
Binding
position 2
(ports 0-9)
Binding
position 3
(ports 0-15)
≤ 57±1 mm