6
Figure 7.27. Engage matching notches in the underside of
the Left Cross Log #6 with the corresponding notches on
Logs #1 and #4.
1
1
Figure 7.28. Place Left Skirt Rock #1 at the base of log four
with engraved number facing inward.
Figure 7.29. Place Left Burner Log Rock #2 underneath left
side of log four, in front of the left burner opening with
engraved number facing inward.
Figure 7.30. Place Center Rock #3 underneath right side
of log four, in front of the left burner opening with the
engraved number facing inward.
Figure 7.31. Place Right Burner Log Rock #4 underneath
right side of log two, in front of the burner's right most
opening with engraved number facing inward.
Figure 7.32. Place left Skirt Rock #5 at the end of log two
and underneath log five, with engraved number facing
inward toward log two.
2
2
Figure 7.33.
burner, be careful not to block pilot area.
3
3
Figure 7.34. Keep Burner and Pilot carry-over ports clear.
139919 GI 545 DV and DV MV 5/19
Place Burner Embers in one even layer over steel
BURNER
CARRY-OVER PORTS
4
5
5
PILOT
PORTS
23