Installation; Unpack Unit; Install Unit In 19" Rack (Optional); Check Settings/Configurations - Bosch PLENA Series Operation Manual

Mixer amplifier, 4-zone, 240w
Table of Contents

Advertisement

PLENA Mixer amplifier, 4-zone, 240W
4

Installation

4.1

Unpack unit

1.
2.
4.2

Install unit in 19" rack (optional)

The PLENA Mixer amplifier is intended for tabletop use or installation in a 19" rack (see figure
4.1).
If you install the unit in a 19" rack:
Figure 4.1: 19" bracket and rack mounting
4.3

Check settings/configurations

1.
2.
4.4

Connect unit to mains

1.
2.
Bosch Security Systems B.V.
Remove the unit from the box, and discard the packaging material according to local
regulations.
Use your fingernails to carefully peel off the protective plastic film from the label holders.
Do not use sharp or pointed objects.
Ensure that it does not exceed the overheating temperature (+45°C ambient).
Use the included Bosch 19" mounting brackets.
Remove the 4 feet from the bottom of the unit.
Connect any additional equipment (see Connecting inputs, page 12, and Connecting
outputs, page 13).
Check the settings (see Configuration, page 14).
Make sure the power switch, on the front of the unit, is set to Off.
Connect the power cord to the mains connector and plug it into the mains outlet.
Operation manual
Installation | en
11
2019-03 | V1.1 |

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ple-4ma240-cn

Table of Contents