Gps - E-Lins H700 Series User Manual

3.5.6 GPS

 Enable: please check it once you need use GPS feature.
 Only GPRMC: if check it, only send GPRMC data info (Longitude Latitude altitude)
 Prefix SN No.: if check it, add the router SN to the data packet
 Send interval: configure the frequency time of updated GPS data packet sending
 GPS Send to: Choose "Serial" or "TCP/IP" method. The router only receives the GPS signal,
will not process it. It will just send the received GPS signal to your GPS processor devices or
servers.
If the GPS processor device is connected to the H700 Router via Serial Port, please choose
"Serial".
If the GPS processor device is a remote server, please choose "Serial".
GPS to TCP/UDP Settings

 Server IP: fill in the correct destination server IP or domain name
 Server port: fill in the correct destination server port
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com
H700 User Manual
www.e-lins.com