89 North LDI-6 Operating Manual page 22

Status Indicator
Status Bar
Figure 16. Here, the ring in the upper right corner of the GUI is yellow, indicating that the LDI is in Warm-up mode. The
operating mode is indicated in the status bar in the lower left corner.
Setting the Control Mode
After the unit completes Warm-up, configure the desired shutter and intensity control modes from
'Control Modes' tab in the 'System Info & Settings' window. The 'System Info & Settings' window is
accessed by gear icon in the LDI GUI (Figure 17).
15000-MNL-01 Rev A 22