89 North LDI-6 Operating Manual page 17

Figure 11. Fiber routing slots in the front panel of the LDI.
Replace the fiber access cover by inserting the lip of the fiber access cover into the fiber access cover slot,
as shown in Figure 12.
Chassis cover
Fiber access cover
Fiber access cover lip
Fiber access cover slot
Figure 12: Fiber Access Cover Replacement
Close the fiber access cover by pressing down on the cover until it latches. If the fiber access cover is not
properly installed and closed, the LDI will not emit light.
Connect the distal end of the installed output fiber(s) to customer-supplied equipment.
15000-MNL-01 Rev A 17