Table of Contents
Advertisement
10 cm
Modbus GND
Modbus B
Modbus A
+24VDC
KLM-L air conditioning
ventilation module
connection
10
Installation / Electrical connection
4.3
WOLF Link pro installation
For stationary use, mount the WOLF Link pro interface module by inserting
screws through the eyelets provided and securing them in a wall.
When connecting the WOLF Link pro to the home network via WLAN, place
10 cm
the WOLF Link pro in a position with good WLAN reception and keep the
depicted area free of metallic objects (e.g. cables and pipes).
X Switch OFF the appliance and associated components
X Disconnect the power supply (MCB or heating emergency stop switch)
X Open the Wolf Link pro by undoing the screw and lifting up the cover on
this side
X Carefully break out the required cable entries with a suitable tool
(e.g. needle-nosed pliers)
+24V/DC
(A)
A
B GND
+
-
GND
(B)
brown
LAN (optional)
eBus (WRS) (optional)
USB (power supply)
3066086_201803
+
-
blue
Hide quick links:
Advertisement
Table of Contents
