Decommissioning And Disposal; Decommissioning; Disposal And Recycling - Wolf Link home Installation And Operating Instructions Manual

KLM-XL air
conditioning ventilation
module connection
WOLF Power Systems
connection
3066086_201803
Installation / Electrical connection
+ - GND
(A) (B)
A B COM
X Please refer to the documentation for each Modbus device for information
about installation and configuration
X Connect the eBUS cable to the eBUS service connection of your heating
appliance or connect the interface Modul with a two-core lead (cross
section >0.5 mm²) to the eBUS terminals of your heating appliance or
accessory controller. In so doing, pay attention to the polarity.
X You can now use the WOLF Link pro (see instructions on the rear).
X Next, reattach the cover and screw it in place.
Use a shielded cable (CAT5 minimum) to connect the Modbus.
4.4 Decommissioning and disposal

4.4.1 Decommissioning

X When decommissioning the interface module, follow the installation
sequence in reverse order.
X Dispose of the interface module correctly.
4.4.2 Disposal and recycling
Appliance
At the end of its service life, do not dispose of the interface module in the
household waste.
X Ensure that the Link interface module and any accessories used are
disposed of correctly.
Packaging
X Ensure that the Link interface module and any accessories used are
disposed of correctly.
11