Table of Contents
Advertisement
Module installation
Remote control
Wall mounting base
installation
3061916_0611
Installation
The BM-Solar programming module can be integrated into the
SM solar module or can be used as remote control in conjunction
with a wall mounting base.
When integrating the BM-Solar in the solar module, all settings
are made at the solar module.
The electrical connection must only be carried out by a
qualified electrician.
- Switch OFF the power at the solar module
- Remove the facia from the solar module
- Click the BM-Solar programming module into the solar
module as shown in the diagram
- Switch ON the power at the solar module
Fitted to a wall mounting base (part no. 2744275), the BM-Solar
programming unit can be used as a remote control (e.g. in the
living room).
Only a two-wire BUS is required for the use as remote control.
- Remove the wall mounting base from its packing.
- Secure the wall mounting base on a flush-mounting box
(Ø 55 mm) or directly on the wall.
Fixing holes
Wall mounting base
Fixing holes
5
Hide quick links:
Advertisement
Table of Contents
