Back Panel
• WAN Port
The WAN Port (the red Ethernet port) connects the Router to a 5G CPE using an Ethernet cable.
• LAN Ports
Three LAN ports (one 2.5 Gbps port on the rightmost and two 1
Gbps ports in the middle) enable you to connect devices to the
Router via Ethernet cables.
• Power Jack
Connect the AC adaptor (power source rated @ output 19Vdc,
maximum 2.37A) to the Power Jack to provide power to the
Router from an electrical outlet.
• Multi‐purpose Pairing Button
Press this button once to connect the Router to other devices via WPS or Bluetooth®.
• Hard reset Button
Press and hold this button for 5 seconds to reset the Router to factory defaults.
4
Document Type/Customer Name