and hold down the button for 5 seconds.
• Volume Adjustment Buttons
Touch‐sensitive volume adjustment buttons are located on the left and right sides of the touchpad on top of
the Router. The "+" button raises volume, while the "‐" button lowers volume.
• Mute Button
A touch‐sensitive mute button is located near the upper edge of the touchpad above the action button.
• Microphones
Four microphones are located on the touchpad, arranged in a square pattern to determine the direction of the
user's voice.
• Circular LED Light
A recessed circular LED light surrounds the touchpad on top of the Router. The LED will light up in different
ways to indicate the connectivity status of the Router.
Function
Pairing (WPS /
Not paired to Receiver (CPE)
Bluetooth®)
Pairing mode active
(WPS or Ethernet pairing)
Ethernet cable to be used for pairing Router and
extender if WPS fails
Pairing success
(WPS or Ethernet pairing)
Pairing fail
The Router displays White after 2 seconds of red hard
blink.
Router connected to CPE and Internet is active,
Wi‐Fi and Internet
but Wi‐Fi is turned Off.
Wi‐Fi quality between IDU and Router is poor.
LED Light Guide
Status
Document Type/Customer Name
Animation
Red
Until changed to other state
Animation
Blue
Lit towards the pairing button side
Until pairing period ends
Animation
Blue
For 2 seconds
Animation
Red
For 2 seconds
Solid
Amber
Until changed to other state
Animation
2
LED Ring