Sony VFH-990 Maintenance Manual page 26

Page Menu Items
S05 FUNCTION2 SECOND VF
PANEL REV <H>
PANEL REV <V>
MAG REL TIME
TEST SIGNAL
COLOR SELECT
TEST LEVEL
S06 HOURS METER RESET METER
OPERATION
TOTAL
*1 : Set this to ON only when using the device as the second VF by connecting it to the EXT I/O (20P) connector of HDC-950 or HDC-
930. (No setting change is required when using the device alone.)
In this case, a dedicated VF connection cable and the corresponding camera settings are needed.
Contact your nearest SONY Office/Service Center for details.
No setting change is required when connecting the device to the EXT I/O (20P) connector of HDC-F950.
*2 : Refer to AUTO RELEASE of OPERATION MENU 03 MEGNIFICATION.
*3 : This parameter will always start in OFF when the power is turned on.
*4 : Place the cursor mark "→" on "EXEC" and press the MENU knob to move to the following operation screen.
Place the cursor mark "→" on "YES" and press the MENU knob to perform reset.
VF MENU
S06 HOURS METER
RESET OK?
RESET METER
OPERATION
TOTAL
2-4 (E)
Setting ( indicates the default)
OFF , ON
OFF , ON
OFF , ON
1 to 5 to 10
OFF , BARS, SAW, RAST
W , R, G, B, Y, C, M
0 to 255
EXEC
Display only
Display only
YES NO
: EXEC
: XXXXXXH
: XXXXXXH
Function
Switches the IIC address used as
the second VF
OFF : Normal
ON : When used as the second
*1
VF
Inverses the screen display
horizontally
OFF : Normal
ON : Inverses horizontally
Inverses the screen display
vertically
OFF : Normal
ON : Inverses vertically
Sets the time it takes to return
from the enlarged view to the
normal view when MAG AUTO
RELEASE is set to AUTO *2
Sets the internal test signal *3
OFF : Does not output the test
signal
BARS : Outputs a color bar signal
SAW : Outputs a saw-tooth wave
test signal
RAST : Outputs a rectangular test
signal
Selects a display color when a
rectangular test signal is selected
Sets the signal level when a
rectangular test signal is selected
Resets the OPERATION time
Press the MENU knob to move to
*4
the operation screen
Displays the total power-on time
(resettable)
Displays the total power-on time
HDVF-C950W