Sony VFH-990 Maintenance Manual page 15

7. Remove the four screws and remove the LCD unit.
n
Standard tightening torque :
25 x 10 _2
8. Remove the two screws and remove the GND terminal
and the EMC cover in the direction of arrow.
9. Remove the two dustproof cushions (V) and the two
dustproof cushions (H) from the front of the LCD
panel.
10. Remove the four screws and remove the LCD brackets
(L) / (R).
11. Disconnect the harnesses from the two connectors
(CN1, P1) of the LCD module, and remove the shield
cushion.
12. Reinstall it by reversing the steps 1 to 11 of disassem-
bling.
n
When the LCD module is replaced, the adjustment is
required. Refer to "Section 3. Electrical Adjustment".
HDVF-C950W
N.m (2.5 kg.cm)
Bezel assembly
Dustproof cushions (V)
Dustproof
cushions (H)
EMC cover
LCD bracket (L)
Shield cushion
LCD module
LCD bracket (R)
P1
B2.6 x 5
Harness (LVDS)
B2.6 x 5
LCD unit
LCD unit
EMC cover
B2.6 x 5
GND terminal
B2.6 x 5
B2.6 x 5
CN1
LCD bracket (L)
Harness (BL)
1-9 (E)