Advertisement
HOUSING
● 18 gauge Welded Steel Enclosure: 9.22"W x 15.4"H x 4.90"D
● Door: 9.27"W x 14.5"H
● Knockouts: 9
● Built-in support bracket incorporated to secure housing for surface mounting
FEATURES
● Limited output voltage and current, plus isolation for safe operation
● Fully potted driver(s) for moisture resistance
● Controllable with DMX decoder module
● Control 4 LED channels with DMX
● Surface mount only
● Suitable for dry, damp and wet locations
● Suitable for Use with Submersible Luminaire
● Primary Voltage - Universal (120-277V )
● Wide operating temperature range: -4 degF to 122 degF
● Fits up to (3):100W 24 VDC driver(s) and DMX decoder module(s)
● Driver has Class A sound rating
● DMX dimming down to 0%
● Class 2 Output
● 5 year warranty
Low Voltage Lighting Systems
: CSA Class 3425-15 and Class 3425-95
: CSA Standard C22.2 No. 250.0-08 - Luminaires
: ANSI/ UL Standard 2108 - Low Voltage Lighting Systems
: CSA Std C22.2 No 250.13-14 - Light Emitting Diode (LED) Equipment for Lighting Applications
: ANSI/ UL Standard 8750 - Light Emitting Diode (LED) Equipment for Use in Lighting Products
LED Landscape Lighting Systems
: CSA Class 3402-15 and Class 3402-95
: CSA Standard C22.2 No. 250.7-07 - Extra-Low-Voltage Landscape Lighting Systems
: ANSI/ UL Standard 1838 - Low Voltage Landscape Lighting Systems
: CSA Std C22.2 No 250.13-14 - Light Emitting Diode (LED) Equipment for Lighting Applications
: ANSI/ UL Standard 8750 - Light Emitting Diode (LED) Equipment for Use in Lighting Products
DMX in/LedSync out
Use these connectors when the driver is used in a DMX network. For DMX in, connect the network
cable's DMX+, DMX- and DMX shielding wire (the orange/white, orange and brown wire in a CAT5
cable) to the DMX in+, DMX in- and DMX in shield connector respectively. For LedSync out, connect
the network cable's DMX+, DMX- and DMX shielding wire to the LedSync out+, LedSync out- and
LedSync shield connector respectively. DMX Shield must be grounded to Earth Ground at a single
point external to power supply
© 2019, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - sales@q-tran.com - www.q-tran.com
QOM-eLED+DMX
LED DRIVER 1
(120V - 277V)
BOTTOM TRAY
W B G R +24 W B G R +24
W B G R +24
SECONDARY
1.36"
4 Knockouts of 1.36"
Hole for 1" fitting
TOP TRAY
ORDERING GUIDE
Model
Size
Prim. V
QOM-eLED
UNV
Secondary
Max Load
1 Size
Voltage(24VDC)
(Watts)
100W
1x100W
24VDC
200W
2x100W
24VDC
300W
3x100W
24VDC
2 Primary Voltage
UNV: 120-277 Vrms
3 Secondary Voltage
24VDC
4 DMX
DMX
5 Options
BK
Black Powder Coat
SS
316 Marine Grade
Finish ( Standard )
Stainless Steel
Ordering Example
QOM-eLED-100-UNV/24+DMX
LED DRIVER 2
LED DRIVER 3
(120V - 277V)
(120V - 277V)
DMX
PRIMARY
9.22"
1.07"
BOTTOM
5 Knockouts of 1.07"
Hole for 3/4" fitting
Sec. V
DMX
Opts
24
+
DMX
Max Prim.
Max Prim.
@ 277V
Amps @ 120V
Amps @ 277V
Max Prim.
0.95 A
0.40 A
1.90 A
0.80 A
2.85 A
1.20 A
1
Advertisement
