Bit Error Rate Is Too High - Ebyte E104-BT10 User Manual

Chengdu Ebyte Electronic Technology Co., Ltd
Please make sure anti-static measures are taken when installing and using, high frequency devices have electrostatic

susceptibility.
Please ensure the humidity is within limited range for some parts are sensitive to humidity.

Please avoid using modules under too high or too low temperature.


6.3 Bit error rate is too high

When there are co-channel signal interference nearby, be away from interference sources or modify frequency and

channel to avoid interference;
The clock waveform on the SPI is not standard. Check whether there is interference on the SPI line. The SPI bus

should not be too long.
Unfavorable power supply may cause messy code. Make sure that the power supply is reliable.

hengdu Ebyte Electronic Technology Co., Ltd
Copyright ©2012–2019，C
E104-BT10 User Manual
4-27