Modules Are Fragile; The Bit Error Rate Is Too High; Revision History; About Us - Ebyte E104-BT5032U User Manual

成都亿佰特电子科技有限公司

4.2 Modules are fragile

Please check the power supply to ensure that between the recommended supply voltages, if the maximum value is exceeded, it

will cause permanent damage to the module;
Please check the stability of the power supply, the voltage can not fluctuate

Please ensure that the installation process is anti-static operation, and the static sensitivity of high-frequency devices;

Please ensure that the humidity during installation and use should not be too high, and some components are humidity sensitive

;
devices
If there is no special need, it is not recommended to use it at too high and too low temperatures.


4.3 The bit error rate is too high

There is the same frequency signal interference nearby, stay away from the source of interference or modify the frequency and

channel to avoid interference
The clock waveform on the SPI is not standard, check whether there is interference on the SPI line, and the SPI bus trace should

not be too long;
 Unsatisfactory power supply may also cause garbled code, and it is important to ensure the reliability of the power supply.

Revision History

version
1.0

About us

Technical support: support@cdebyte.com
Documents and RF Setting download link: www.ebyte.com
Thank you for using Ebyte products! Please contact us with any questions or suggestions: info@cdebyte.com
-------------------------------------------------------------------------------------------------
Phone: +86 028-61399028
Web: www.ebyte.com
Address: B5 Mould Park, 199# Xiqu Ave, High-tech District, Sichuan, China
Copyright ©2012–2020，成都亿佰特电子科技有限公司
;
Date of revision
2021-12-24
significantly and frequently;
Revision Notes
Initial release
E104-BT5032U 产品规格书
Maintainer
7