Water Filter Drain Valve; Spray Nozzle - Toto WASHLET TCF802C2G Instruction Manual

Hide thumbs Also See for WASHLET TCF802C2G:
Table of Contents

Advertisement

Maintenance

Water Filter Drain Valve

<If the water pressure is still weak even after performing descaling>
1
Close the shutoff valve.
• The water supply stops.
CAUTION
Do not remove the water filter drain
valve while the shutoff valve is open.
(Otherwise, water may leak out)
2
Press "Wand CLEAN"
button.
(Release the pressure from the water
supply pipe.)
• Water comes out from around the wand.
Remove the cover on the left
3
side of the main unit, and flip
the power switch to "OFF".
(Page 28)
Remove the water filter drain
4
valve.
• Loosen the water filter drain valve with a
flat-head screwdriver and then pull it.
Water filter drain valve
Flat-head screwdriver
40
Water Filter Drain Valve
(Approximately once every 6 months)
Clean the filter with a tool
5
(Page 67)
such as a toothbrush.
• Also, remove any dust from inside the hole
of the water filter drain valve.
Filter
Reinstall the water filter drain
6
valve.
• Insert the water filter drain valve and use a
flat-head screwdriver to tighten it securely.
Flip the power switch to ON.
7
(Page 28)
• The "Power" LED lights up.
8
Reinstall the cover.
9
Open the shutoff valve.

Spray Nozzle

<If the water pressure is still weak even after performing descaling and water filter drain valve cleaning>
1
Remove the spray nozzle from the wand
(1) Extend the wand.
(2) While holding the wand with a
hand, press on both sides of
the spray nozzle and slide it.
Install a spray nozzle (for replacement).
2
Check that the gasket (black) is
attached.
(1) Hold the wand by hand and slide the replacement spray nozzle along the guide
and push it in.
(Page 29)
Hold the wand
with your hand.
(Page 13)
(2)
Attention!
Keep the spare nozzle in safe place.
Clean the removed spray nozzle using the descaling agent specified by TOTO
• Do not disassemble the spray nozzle. (May cause malfunctions.)
Spray Nozzle
(see process
on page 30)
Wand
• Do not pull with undue
Hold the wand
force.
with your hand.
Spray nozzle
(May cause damage
or malfunction.)
Gasket
• Install correctly until a click sound is heard.
• Do not push with undue force. (May cause damage or malfunction.)
Guide
Press "Stopping" button on the front
side of the remote control.
• The wand retracts.
• Water comes out from around the wand.
Cleaning the blocked Nozzle
Descaling agent specified by
TOTO (Page 35)
Other detergents
.
(Page 35)
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Washlet tcf801cg

Table of Contents