Automatic Functions (Cleaning Features) - Toto WASHLET TCF802C2G Instruction Manual

Automatic Functions
*1
"ewater+" is used
As you
automatically to clean the
approach
wand and bowl unit.
• Operation under the initial
settings is described
below.
Removing odours inside the
bowl unit
Deodorizer
Cleans the wand with
1
"ewater+"*
Auto wand
CLEAN
Pre-mist
Cleans the bowl unit with
→A mist is
1
"ewater+"*
sprayed inside
Auto bowl
the bowl unit to
make it more
difficult for dirt
CLEAN
to adhere
Bowl light
CLEAN
indicator
(Lights up)
18
Cleaning Features
As you As you
* 2
* 2 stand up
sit
Starts the auto power
deodorizer
(After about 10 seconds)
→It stops after about 60
Starts the deodorizer
seconds
Cleans the wand
automatically
(After about 25 seconds)
Only when the cleansing
functions are used.
→The wand extends and
1
"ewater+" *
from the base of the wand
After-mist
(After auto wand CLEAN)
If the cleansing functions
are not used, after-mist
starts after about 25
seconds.
→"ewater+"*
1
mist is sprayed
on the bowl unit
Lights up
Lights up during
during
auto wand CLEAN
pre-mist
and after-mist
(Lights up in a
cycle)
Lights to show that the "CLEAN" functions are operating.
■Bowl light
Lights to show that auto bowl CLEAN
and auto wand CLEAN are operating.
■Note
• • Deodorizing filter needs regular
maintenance. (Page 31)
• •
When the cleansing functions (Rear
and Front cleansing etc,) have not
been used in 8 hours, the wand is
cleaned automatically.
(Water comes out from around the
wand.)
comes out
• •
The pre-mist and after-mist are not
sprayed if the toilet seat is open.
• •
The pre-mist does not work for about
90 seconds after the after-mist has
finished.
• •
When the cleansing feature (Rear and
Front cleansing etc,) is not used for
about 8 hours, mist is sprayed on the
bowl unit automatically.
• •
Lights up continuously or in a cycle
when "Auto wand CLEAN", "Auto bowl
CLEAN" or "Auto power deodorizer" is
operating.
(Lights only when the toilet seat is not
in-use)
■CLEAN indicator
Lights to show that the "clean"
functions are operating.
■ Changing
"ewater+" can also be used by
pressing the remote control button
settings
For wand
• • Press "Wand
"Deodorizer" ON/OFF
• •
CLEAN" button
"Auto power deodorizer"
ON/OFF
(After wand cleaning, water comes out
(Page 52 for all)
from around the wand.)
To clean the wand with it extended.
→"Wand cleaning" (Page 30)
• •
"Auto wand CLEAN"
For bowl unit (Manual CLEAN)
ON/OFF
1
(Page 50)
Press.
2
Select [MANUAL CLEANING].
→
Press.
• •
3
"Auto bowl CLEAN" ON/
OFF
Select [MANUAL CLEAN].
(Page 50)
→
Press.
("ewater+" mist is sprayed on the bowl unit)
Note
• •
It cannot be used when the wand is out
• •
"Bowl light" ON/OFF
or when you are sitting on the toilet seat.
(Page 54)
*1 What is meant by "ewater+" ?
This water containing hypochlorous acid generated
from chloride ions in tap water, is widely used
for cleaning and disinfecting items such as food,
utensils and baby bottles.
• •
"CLEAN indicator" ON/ •
Well water may not deliver the required effect.
OFF
(Because the level of chloride ions is low.)
•
"ewater+" helps to minimize dirty surfaces,but
(Page 54)
does not make cleaning unnecessary.
•
The effect and duration vary depending on the
usage environment and conditions.
*2 Water comes out from around the wand.
19