Water Filter Drain Valve - Toto WASHLET TCF4914E Series Instruction Manual

Water Filter Drain Valve

Water Filter Drain Valve
<If you think the water pressure has weakened>
1 Close the shutoff valve.
The water supply stops.
CAUTION
Do not remove the water
 lter drain valve while the
shutoff valve is open.
(Otherwise, water may leak out.)
Shutoff
valve
2
Press
"Wand CLEAN" button.
Open the wand cover. (Release the
pressure from the water supply pipe.)
3
Switch the breaker on the
distribution board to OFF.
4
Remove the cover and
water  lter drain valve.
Loosen the water  lter drain valve with
a  at-head screwdriver and then pull it.
Cover
Flat-head screwdriver
Water Filter Drain Valve
(Approximately once every 6 months)
5 Clean with a tool such as a
toothbrush.
Also, remove any dust from inside the
hole of the water  lter drain valve.
6 Reinstall the water  lter
drain valve and cover.
Insert the water  lter drain valve and use a
 at-head screwdriver to tighten it securely.
7
Switch the breaker on the
distribution board to ON.
The "Power" LED lights up.
8
Open the shutoff valve.
(Page 15)
35