Start-Up; Installing The Smartvest App; Setting Up The Smartvest - Abus Smartvest FUMK35000 User Manual

2. Start-up

Before installing your Smartvest and detector, follow the steps below to start up your Smartvest and
pair components with the Smartvest.

Installing the Smartvest App

Setting up the Smartvest

For the Smartvest, there is an app called "Smartvest" available for
download from the Google Play Store and the iOS App Store. This
app can be used on smartphones and tablets, referred to as "end
devices" from this point on.
For installation, go to the Google Play Store or the iOS App Store
and search for "Smartvest".
Install the Smartvest App.
Note
Please note that the following operating systems are
a minimum requirement for running the Smartvest
App:
Apple
Android
First connect the LAN cable provided on the underside of the
Smartvest and connect this to your router,
then connect the power supply unit provided.
Note
Ensure that the DHCP function is activated on your
router as otherwise it will not be possible to connect
to the Smartvest.
Only start setting up the Smartvest via the app when
the green power LED lights up continuously and the
alarm panel beeps twice.
There is no double beep sound if integrated into a
local network without Internet access.
16
iOS 7
4.0
English