Abus Smartvest FUMK35000 User Manual page 73

Under side

Reset button

RJ45 connector

Voltage supply

Hygrometer



To reset passwords to the default settings (123456) and network settings
to DHCP:

While the system is in operation, press and hold the reset button for
>10 seconds using a paper clip. The power LED will go out and a
continuous tone will sound. The system then restarts.
Resetting the system to the default settings means that all settings are reset
and component pairings are deleted.

Press the reset button with the alarm control panel turned off, and
hold it for >10 seconds while turning on the alarm control panel. The
power LED will go out and a continuous tone will sound. The system
then restarts.
Integrated network access 10/100 Mbit
5 V DC/1.5 A. Device starts automatically when powered by line voltage.
Integrated hygrometer for measuring temperature and humidity
9
English
