12. MAINTENANCE
3. Remove fill plug and add 825 ±25ml of SAE GL-4 85W/90 Weight
Gear Lubricant and inspect oil level. Oil level should be kept even
with the center of the drill point (approximately below the top of the fill
hole).
4. Reinstall the fill plug. Torque Fill plug to 16~22 ft. lbs. (22~30N.m)
5. Check for leaks.
WHEEL NUT TORQUE SPECIFICATIONS
Bolt Size
Front M12X1.25
Rear M12X1.25
NOTE: All nuts that have a cotter pin installed must be serviced by
an authorized Dealer.
Front Wheel Hub Tightening
Front wheel bearing tightness and spindle nut retention are critical
component operations. Service work must be performed by an
authorized dealer.
Front
Tapered nuts: install with
tapered side against wheel
AXLE BOOTS
OWNER'S/OPERATOR'S MANUAL
LH50DU
Specification
69Ft.Lbs
69Ft.Lbs
Rear
95N.m
95N.m
12- 11
1.0