Linhai LH50DU Owner's/Operator's Manual page 101

12. MAINTENANCE
Operating your CUV with worn tires, improperly inflated tires,
non-standard tires or improperly installed tire will affect vehicle handling
which could cause an accident resulting in serious injury or death.
Follow the safeguards listed below to prevent this type of situation.
Important Safeguards
Maintain proper tire pressure according to charts below. Improper tire
inflation may affect CUV maneuverability.
Do not use improper tires. The use of non-standard size or type tires
may affect CUV handling.
Make certain the wheels are installed properly. If wheels are improperly
installed it could affect vehicle handling and tire wear.
Tire Pressure
front
see detail on the mark of sidewall
Wheel Removal Procedure
1. Stop the motor, place the transmission in gear and lock the parking
brake.
2. Loosen the wheel nuts slightly.
3. Elevate the side of the vehicle by placing a suitable stand under the
footrest frame.
4. Remove the wheel nuts and remove the wheel.
Wheel Installation
1. With the transmission in gear and the parking brake locked, place th
wheel in the correct position on the wheel hub. Be sure the valve stem
is toward the outside and totation arrows on the tire point toward
forward rotation.
2. Attach the wheel nuts and finger
tighten them.
3. Lower the vehicle to the ground.
4. Securely tighten the wheel nuts
according to the chart found in "12.MAINTENANCE/ Wheel Nut
Torque".
OWNER'S/OPERATOR'S MANUAL
LH50DU
rear
see detail on the mark of sidewall
1.0
12- 19