Mounting The Boiler And Making Connections; Removing The Front Panel; Mounting The Boiler On The Pre-Plumbing Jig Or Mounting Frame - Viessmann Vitodens 200-W B2HE Installation And Service Instructions Manual

Mounting the boiler and making connections

Removing the front panel

3.
2.
1.
2x
Fig. 4
1. Unlock the front panel on the underside (push in),
using a screwdriver or similar tool.

Mounting the boiler on the pre-plumbing jig or mounting frame

Note
Various installation components can be found in a sep-
arate pack. Keep the installation components safe, as
they will be required for later installation.
2. Swivel the front panel forwards slightly and lift
away upwards.
Note
Do not remove protective caps from connections
on the heating water side and from the gas con-
nection until you are about to commence installa-
tion.
Installation sequence
11