Viessmann Vitodens 200-W B2HE Installation And Service Instructions Manual page 7

Intended use
(cont.)
Incorrect usage or operation of the appliance (e.g. the
appliance being opened by the system user) is prohibi-
ted and will result in an exclusion of liability. Incorrect
usage also occurs if the components in the heating
system are modified from their intended use (e.g. if the
flue gas and ventilation air paths are sealed).
Product information
Vitodens 200-W, type B2HE, B2KE
Wall mounted gas condensing boiler with Inox-Radial
heat exchanger and the following integrated compo-
nents:
■ Modulating MatriX Plus burner for natural gas and
LPG
Hydraulics with 3-way diverter valve and variable
■
speed high efficiency circulation pump
Type B2KE: Plate heat exchanger for DHW heating
■
■ Weather-compensated or constant temperature con-
trol unit
■ Integral diaphragm expansion vessel (10 l capacity)
The selected gas category in the delivered condition
and the associated nominal gas pressure are given on
the boiler type plate. The type plate also shows the
other gas types and pressures with which the boiler
can be operated. A conversion within the stated natu-
ral gas groups is not required. For switching to LPG or
natural gas M (without conversion kit), see "Commis-
sioning, inspection and maintenance".
System examples
System examples with hydraulic and electrical connec-
tion diagrams and function descriptions are available
to help setting up the heating system.
Spare parts lists
Information about spare parts can be found on the
Viessmann spare parts app.
Type plate
A
Fig. 1
Type plate
A
The Vitodens 200-W may only be delivered to coun-
tries listed on the type plate. For deliveries to other
countries, approved contractors must arrange individ-
ual approval on their own initiative and in accordance
with the law of the country in question.
Detailed information on system examples can be found
at: www.viessmann-schemes.com
Information
7