Advertisement
DIAGNOSTIC MANUAL
DRIVER PRETENSIONER
Driver Pretensioner is located on driver side B pillar. Pretensioner is used to remove any slack from the
seat belts in the event of a collision. These devices improve the performance of the seat belt system by
assuring that the belt is tight around the occupant in a collision.
COMPONENT LOCATION
NORMAL
OPERATION
DTC DETECTING
CONDITION
PROBABLE
CAUSES
LAMP STATUS
DTC REACTION
HEALING
CONDITION
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2011 Mahindra & Mahindra Ltd.
B1041 - Driver Pretensioner short to battery voltage
During Ignition ON, SRS ECU performs self test and checks the loop voltage of
the Driver Pretensioner and is within the range
The Driver Pretensioner loop short to battery positive
Short to battery of Driver Pretensioner positive wire
Short to battery of Driver Pretensioner negative wire
SRS ECU malfunction
SRS warning lamp ON
SRS not available
Ignition Off/On
SRS
MAN-00156
OCT 2011/Rev 1
58
Advertisement
