Charge The Battery - VTech DS6161 User Manual

Charge the battery

After you have activated the handset,
place it in the telephone base to charge
for at least 12 hours. While charging, the
CHARGE light turns on.
Once you have activated the handset, the
LCD display indicates the battery status (see
the table below).
• For best performance, keep the handset in
the telephone base when not in use.
• The battery is fully charged after 12 hours of
continuous charging.
Battery Battery
indicators status
The screen The battery
is blank, or has no or very
displays Place little charge.
in charger and The handset
flashes. cannot be
used.
The screen The battery
displays has enough
charge to be
Low battery
used for a
and flashes.
short time.
The screen The battery is
displays charged.
HANDSET X.
Action
Charge without
interruption
(at least 30
minutes).
Charge without
interruption
(about 30
minutes).
To keep
the battery
charged,
place it in the
telephone
base when not
in use.
7
When the battery is fully charged, you can
expect the following performance:
Operation
While in use (talking*)
While in speakerphone
mode (talking*)
While not in use (standby**)
* Operating times vary depending on your
actual use and the age of the battery.
** Handset is not charging nor in use.
Operating
time
Seven hours
Three and a
half hours
Five days