Brake Chopper Module Type Designation Key - ABB ACS880-607 Series Hardware Manual

28 Operation principle and hardware description
CODE DESCRIPTION
K470 FEPL-01 Ethernet POWERLINK adapter module
K473 FENA-11 Ethernet/IP™, Modbus/TCP and PROFINET adapter module
K475 FENA-21 high performance Ethernet/IP™, Modbus/TCP and PROFINET adapter module
K480 Ethernet switch with optical link for PC tool and control network
Documentation
Note: English-language manuals are included if a translation in the specified language is not available.
R700 English
R701 German
R702 Italian
R705 Swedish
R706 Finnish
R707 French
R708 Spanish
R711 Russian
R716 Hard copies of documentation

Brake chopper module type designation key

Type designation describes the composition of the module in short. The complete designation
code is divided in subcodes:
• The first digits form the basic code. It describes the basic construction of the module.
The fields in the basic code are separated by hyphens.
• The plus codes follow the basic code. Each plus code starts with an identifying letter
(common for the whole product series), followed by descriptive digits. The plus codes
are separated by plus signs.
The subcodes are described below.
CODE DESCRIPTION
Basic codes
ACS880 Product series
104 Construction: inverter, supply, converter or brake module. The module includes internal du/dt filters
and a speed-controlled cooling fan supplied from the DC bus as standard.
Ratings / size
xxxxx Size
Voltage range
3 513...566 V DC. This is indicated in the type designation label as typical input voltage level 566 V
DC.
5 513...707 V DC. This is indicated in the type designation label as typical input voltage levels 566
/ 679 / 707 V DC.